| Geotechnical Investigations GL0130-Manual on Subsurface Investigations: Geotechnical Site Characterization
2001, Mayne et al, NHI Manual, 295 pages, 15.7 MB pdf
GL0131-Geotechnical Investigations
2001, U.S.Army engineer manual, 148 Pages
GL0132-Geotechnical Manual
2000, Texas Department of Transportation, 231 Pages, 11.5MB pdf
GL0133-Manual for Preparation of Geotechnical Reports
2001, Los Angeles County, Department of Public Works, 95 Pages, 744 KB pdf
GL0134-Geotechnical Data Collection for Exploration Geologists
2001, Knight Pi?sold Consulting, 48 Pages, 3.8 MB pdf
GL0136-Evaluation of Soil and Rock Properties
2002, FHWA Geotechnical Engineering Circular No. 5, 386 Pages
GL0137-Soil Sampling
1996, U.S.Army engineer manual, 251 Pages
GL0141-Stress-strain-strength-flow characteristics from enhanced in-situ testing
2001, Mayne, Bali, Keynote, 23 Pages, 2.49 MB pdf
GL0227-Soils and Foundations Handbook
2004, Florida department of transportation handbook, 180 Pages, 3.76 MB pdf
GL0257-Assessment of In-situ Test Technology for Construction Control of Base Courses and Embankments
2004, Louisiana Transportation Research Center, 143 Pages, 3.72 MB pdf
GL0354-Site Investigation
2005, C. R. I. Clayton, M. C. Matthews and N. E. Simons, Online full text book, Department of Civil Engineering, University of Surrey
GL0419-An Assessment of Chamber Size Effects in the Calibration of In Situ Tests in Sand
1991, Schnaid, F. and Houlsby, G.T., G?otechnique, Vol. 41, No. 3, September, pp 437-445, ISSN 0016-8505, 3.22 MB pdf
GL0639-Instrumented borehole drilling for subsurface investigation
2002, Gui, M.W., Soga, K., Bolton, M.D. and Hamelin, J.P., ASCE Journal of Geotechnical and Geoenvironmental Engineering, 128, (4), 283-291, 505 KB pdf
GL0721-Geotechnical Risk and Inadequate Site Investigations: A Case Study
2000, Jaksa, M. B., Australian Geomechanics, Vol. 35 No. 2, June, pp. 39-46, 410 KB pdf
GL0725-Cost of Foundation Failures Due to Limited Site Investigations
2004, Goldsworthy, J. S., Jaksa, M. B., Kaggwa, W. S., Fenton, G. A., Griffiths, D. V. and Poulos, H. G., Proc. Int. Conf. On Structural and Foundation Failures, Singapore, August, pp. 398-409, 314 KB pdf
GL0727-The Influence of Site Investigations on the Design of Pad Footings
2004, Goldsworthy, J. S., Jaksa, M. B., Kaggwa, W. S., Fenton, G. A., Griffiths, D. V., Poulos, H. G. and Kuo, Y. L., Proc. 9th Australia New Zealand Conference on Geomechanics, Auckland, Vol. 1, pp. 282-288, 235 KB pdf
GL0731-A Framework for Quantifying the Reliability of Geotechnical Investigations
2003, Jaksa, M. B., Kaggwa, W. S., Fenton, G. A. and Poulos, H. G., Applications of Statistics and Probability in Civil Engineering, ICASP9, A. Der Kiureghian, S. Madanat and J. M. Pestana (eds.), San Francisco, Millpress, Rotterdam, Vol. 2, pp. 1285-1291, 172 KB pdf
GL0749-Ground Engineering Risk and Geotechnical Site Investigation: A Case Study Outlining What Can Go Wrong
1999, Jaksa, M. B., Seminar on Ground Engineering Risk, Aust. Geomech. Soc., S.A. Chapter, May, pp. 63-71. Superceded by Jaksa (2000), Australian Geomechanics, 410 KB pdf
GL0843-Advanced Analysis of Field Tests
1998, Houlsby, G.T., Invited Theme Lecture, 1st International Conference on Site Characterization, ISC98, Atlanta, 19-22 April, Balkema, Vol. 1, ISBN 90-5410-940-8, pp 99-112, 225KB pdf
GL0901-Preparation and Shipment of Undisturbed Core Soil Samples
1973, United States Department of Agriculture, National Engineering Handbook, Soil Mechanics Note 6
GL1273-Rational interpretation of in-situ tests in cohesive soils
1992, Aubeny, Charles Paul, PhD thesis, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering
GL1952-REQUIREMENTS FOR GEOTECHNICAL INVESTIGATION AND PAVEMENT INVESTIGATION
1997, Indiana Department of Transportation, 67 Pages
GL2006-Geotechnical Investigation
2006, Rajesh Kumar, 34 Pages
GL0135-Standard Penetration Test
1988, U.S.Army engineer technical letter, 8 Pages
GL0138-Enhanced Geotechnical site characterization by Seismic Piezocone Penetration Tests
2000, Mayne, 24 Pages, 2.40 MB pdf
GL0142-US National Report on Cone Penetration Testing
1995, Mayne, Mitchell, Auxt, and Yilmaz., 16 Pages, 691 KB pdf
GL0144-Profiling OCR in clays by piezocone
1994, Mayne and Chen, 294 Pages, 22.7 MB pdf
GL0207-The Effects of Vibration on the Penetration Resistance and Pore Water Pressure in Sands
2000, Bonita, John Anthony, PhD thesis, Virginia Polytechnic Institute and State University
GL0258-EVALUATION OF CONSOLIDATION CHARACTERISTICS OF COHESIVE SOILS FROM PIEZOCONE PENETRATION TESTS
2004, Louisiana Transportation Research Center, 124 Pages, 2.12 MB pdf
GL0265-A Study of the Piezocone Penetrometer in Normally Consolidated Clay - Abstract
1987, Coop, M.R., PhD thesis, Oxford University, 5.75 MB pdf
GL0266-An Analytical Study of the Cone Penetration Test - Abstract
1987, Teh, C.I., PhD thesis, Oxford University, 6.47 MB pdf
GL0267-Piezocone Studies in Lightly Overconsolidated Soil - Abstract
1990, Nyirenda, Z.M., PhD thesis, Oxford University, 8.97 MB pdf
GL0280-Field measurements of CPT and pile base resistance in sand
2003, White D.J., Cambridge University Engineering Department Technical Report, 26 Pages, 425 KB pdf
GL0413-Calibration Chamber Tests of a Cone Penetrometer in Sand
1988, Houlsby, G.T. and Hitchman, R., G?otechnique, Vol. 38, No. 1, March, pp 39-44, ISSN 0016-8585, 3.66 MB pdf
GL0458-Advantages and equations for pile design in Brazil via DPL tests
2003, Nilsson, T., Cunha, R., 2nd International Conference on Geotechnical Site Characterization, Porto, Portugal, 19-22 September, 5 Pages, 133 KB pdf
GL0603-Guidelines for cone penetration tests in sand
1998, Gui M.W., Bolton M.D., Garnier J., Corte J.F., Bagge G., Laue J., Renzi R., Proceedings International Conference Centrifuge 98, Tokyo, 1, 155-160, 596 KB pdf
GL0605-Geometry and scale effects in CPT and pile design
1998, Gui M.W. and Bolton M.D., Proceedings 1st International Conferenc on Site Characterisation, ISC 98, Atlanta, 1063-1068, 582 KB pdf
GL0611-Centrifuge cone penetration tests in sand
1999, Bolton M.D., Gui M.W., Garnier J., Corte J.F., Bagge G., Laue J. and Renzi R., Geotechnique, 49, No. 4, 543-552, 515 KB pdf
GL0719-An Improved Statistically Based Technique for Evaluating the CPT Friction Ratio
2002, Jaksa, M. B., Kaggwa, W. S. and Brooker, P. I., Geotechnical Testing J., ASTM, Vol. 25, No. 1, pp. 61-69, 938 KB pdf
GL0722-An Experimental Study to Quantify the Cone Factor of a Stiff, Overconsolidated Clay
1998, Jaksa, M. B., Civil Engrg. Transactions, Inst. Engineers, Aust., Vol. CE40, pp. 43-48, 913 KB pdf
GL0734-Assessment of Fractal Behavior of Soils
2002, Jaksa, M. B. and Fenton, G. A., Proc. Int. Conf. on Probabilistics in GeoTechnics: Technical and Economic Risk Estimation, R. P?ttler, H. Klapperich and H. Schweiger (eds.), Graz, Austria, United Engineering Foundation, New York, pp. 47-54, 486 KB pdf
GL0750-A Data Acquisition System for the Cone Penetration Test
1990, Jaksa, M. B., Seminar on Computing in Geomechanics, Aust. Geomech. Soc., S.A. Div., September, pp. 22-31, 132 KB pdf
GL0753-An Improved Technique for Evaluating the CPT Friction Ratio
2000, Jaksa, M. B., Kaggwa, W. S. and Brooker, P. I., Research Report No. R 166, School of Civil & Env. Engrg., Uni. of Adelaide, January, 25 pp, 501 KB pdf
GL0755-Modelling the Lateral Spatial Variation of the Undrained Shear Strength of a Stiff, Overconsolidated Clay Using an Horizontal Cone Penetration Test
1994, Jaksa, M. B., Brooker, P. I., Kaggwa, W. S., van Holst Pellekaan, P. D. A. and Cathro, J. L., Research Report No. R 117, School of Civil & Env. Engrg., Uni. of Adelaide, September, 34 pp, 659 KB pdf
GL0756-A Micro-Computer Based Data Acquisition System for the Cone Penetration Test
1994, Jaksa, M. B. and Kaggwa, W. S., Research Report No. R 116, School of Civil & Env. Engrg., Uni. of Adelaide, May, 31 pp, 565 KB pdf
GL0760-Penetrometers for Soil Permeability and Chemical Detection
1998, Burns, S.E. and Mayne, P.W., Report No. GIT-CEEGEO-98-1, Georgia Institute of Technology, 144 pp, 2.9 MB pdf
GL0809-Analysis of Undrained Cone Penetration as a Steady State Flow Problem
1985, Houlsby, G.T., Norbury, J. and Wheeler, A.A., Proceedings of the 5th International Conference on Numerical Methods in Geomechanics, Nagoya, April, Vol. 4, ISBN 90-6191-584-8, pp 1767-1776, 2041KB pdf
GL0813-Analysis of the Piezocone in Clay
1988, Houlsby, G.T., and Teh, C.I., Proceedings of the 1st International Symposium on Penetration Testing, ISOPT-1, Orlando, Florida, March, Vol. 2, ISBN 90-6191-803-0, pp 777-783, 2348KB pdf
GL0816-Analysis of the Cone Penetration Test by the Strain Path Method
1988, Teh, C.I. and Houlsby, G.T., Proceedings of the 6th International Conference on Numerical and Analytical Methods in Geomechanics, Innsbruck, April, Vol. 1, ISBN 90-6191-810-3, pp 397-402, 2048KB pdf
GL0818-Piezocone Penetration Test
1988, Houlsby, G.T., Invited Report, Session 3, Proceedings of the Geotechnology Conference on Penetration Testing in the U.K., Birmingham, July 6-8, ISBN 0-7277-1377-9, pp 141-146, 3776KB pdf
GL0822-Finite Element Analysis of the Cone-Pressuremeter Test
1990, Houlsby, G.T. and Yu, H.S., Proceedings of the 3rd International Symposium on Pressuremeters, ISP3, Oxford, April 2-6, ISBN 0-7277-1556-9, pp 221-230, 2346KB pdf
GL0825-Analysis of Cone Penetrometer and Pressuremeter Tests
1990, Houlsby, G.T., Proceedings of the 2nd European Speciality Conference on Numerical Methods in Geotechnical Engineering, Santander, September 18-20, ISBN 84-7790-077-9, pp 429-440, 4543KB pdf
GL0830-Stresses Near the Shoulder of a Cone Penetrometer in Clay
1992, Sagaseta, C. and Houlsby, G.T., Proceedings of the Third International Conference on Computational Plasticity Fundamentals and Applications, Barcelona, April 6-10, Part 1, Section 5, Plasticity Approaches in Geotechnics, pp 895-906, 2346KB pdf
GL0844-Interpretation of Signals from an Acoustic Cone Penetrometer
1998, Houlsby, G.T. and Ruck, B.M., 1st International Conference on Site Characterization, ISC98, Atlanta, 19-22 April, Balkema, Vol. 2, ISBN 90-5410-941-6, pp 1075-1080, 63KB pdf
GL0902-The Static Cone Penetrometer Test (CPT)
1984, United States Department of Agriculture, National Engineering Handbook, Soil Mechanics Note 7
GL0912-An experimental investigation of factors afffecting penetration resistance in granular soils in centrifuge modelling
1987, R Phillips and A Valsangkar, Cambridge University Engineering Department Technical Report
GL0914-The study of relative density and boundary effects for cone penetration tests in a centrifuge
1992, M D Bolton and M W Gui, Cambridge University Engineering Department Technical Report
GL1232-Cone penetration in clays
1978, Vivatrat, Vitoon, PhD thesis, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering
GL1272-Prediction and interpretation of piezocone data during undrained, drained and partially drained penetration
1989, Elghaib, Majid Kaissar, PhD thesis, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering
GL1288-Analysis of soil penetrometer using Eulerian finite element method
2003, Hu, Shuang, MS thesis, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering
GL1500-Cavity Expansion and Penetration Resistance in Sand
1997, Salgado, R., Mitchell, J.K., and Jamiolkowski, M., Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), April, 344-354.
GL1505-Calibration Chamber Size Effects on Penetration Resistance in Sand
1998, Salgado, R., Mitchell, J.K., and Jamiolkowski, M., Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 124 (9), September, 878-888.
GL1506-Penetration Resistance in Sands: Analysis and Applications to Liquefaction Potential Assessment and Estimation of Pile Base Resistance
1998, Salgado, R., Jamiolkowski, M. and Mitchell, J.K., Rivista Italiana di Geotecnica, September/December XXXII(4), 5-17.
GL1512-Analysis of Cavity Expansion in Sand
2001, Salgado, R. and Randolph, M.F., International Journal of Geomechanics, 1(2), 175-192.
GL1537-Computation of Cavity Expansion Pressure and Cone Resistance in Sand
2006, Salgado, R. and Prezzi, M., Internation Journal of Geomechanics, ASCE, accepted.
GL1541-Calibration Chamber Size Effects on Penetration Resistance in Sand
2001, Salgado, R., Mitchell, J.K., and Jamiolkowski, M., Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 127(7), September, 629-630 (closure).
GL1754-Analysis of soil penetration
1994, van den Berg, P., PhD thesis, Delft university, Department of Civil Engineering and Geosciences
GL2062-Optical analysis of stress around a penetrating probe in granular material
2002, H.G.B. Allersma and W. Broere, In R. Philips, P. Guo, and R. Popescu, editors, Physical Modelling in Geotechnics: Proceedings of the International Conference on Physical Modelling in Geotechnics 02, pages 149-154. Swets and Zeitlinger
GL2066-Tunnel Face Stability and New CPT Applications
2001, W. Broere, PhD thesis, Delft University of Technology, Delft
GL2067-Horizontal cone penetration testing in sand
2001, W. Broere and A.F. van Tol, In P.P. Rahardjo and T. Lunne, editors, Proceedings International Conference on In Situ Measurements and Case Histories, pages 649-654, Bandung, Indonesia, 2001. Parahyangan Catholic University
GL2068-Horizontal cone penetration testing in sand
2001, W. Broere and A.F. van Tol, In Publications Committee of the XV ICSMFE, editor, Proceedings of the XVth ICSMGE, pages 555-558. Balkema
GL2073-Horizontal cone penetration testing
1998, W. Broere and A.F. van Tol, In P.K. Robertson and P.W. Mayne, editors, Geotechnical Site Characterization, Proc. ISC'98, pages 989-994. Balkema
GL0139-The Unload-Reload Pressuremeter Test
2001, Combarieu and Canepa, Bulletin des Laboratoires des Ponts et Chaussées 233
GL0268-A Study of the Cone- pressuremeter Test in Sand - Abstract
1990, Schnaid, F., PhD thesis, Oxford University, 5.55 MB pdf
GL0269-Cavity Expansion Theory and its Application to the Analysis of Pressuremeters - Abstract
1990, Yu, H.S., PhD thesis, Oxford University, 5.41 MB pdf
GL0270-Development of the Cone Pressuremeter - Abstract
1993, Nutt, N.R.F., PhD thesis, Oxford University, 7.84 MB pdf
GL0271-A Study of the Effect of Length to Diameter Ratio on the Results of Pressuremeter Tests - Abstract
1996, Yao, M., PhD thesis, Oxford University, 4.46 MB pdf
GL0414-Analysis of the Cone Pressuremeter Test in Clay
1988, Houlsby, G.T. and Withers, N.J., G?otechnique, Vol. 38, No. 4, December, pp 575-587, ISSN 0016-8505, Awarded the inaugural Geotechnical Research Medal, Institution of Civil Engineers, 4.56 MB pdf
GL0417-An Analytical Study of the Cone Penetrometer Test in Clay
1991, Teh, C.I. and Houlsby, G.T., G?otechnique, Vol. 41, No. 1, January, pp 17-34, ISSN 0016-8505, 6.72 MB pdf
GL0418-Finite Cavity Expansion in Dilatant Soils: Loading Analysis
1991, Yu, H.S. and Houlsby, G.T., G?otechnique, Vol. 41, No. 2, pp 173-183, ISSN 0016-8505, 5.59 MB pdf
GL0422-Measurement of the Properties of Sand in a Calibration Chamber by the Cone Pressuremeter Test
1992, Schnaid, F. and Houlsby, G.T., G?otechnique, Vol. 42, No. 4, December, pp 587-601, ISSN 0016-8505, 7.05 MB pdf
GL0425-The Effects of Pressuremeter Geometry on the Results of Tests in Clay
1993, Houlsby, G.T. and Carter, J.P., G?otechnique, Vol. 43, No. 4, December, pp 567-576, ISSN 0016-8505, 7.03 MB pdf
GL0426-Interpretation of Shear Moduli from Cone-Pressuremeter Tests in Sand
1994, Houlsby, G.T. and Schnaid, F., G?otechnique, Vol. 44, No. 1, March, pp 147-164, ISSN 0016-8505, 6.23 MB pdf
GL0427-A Large Strain Analytical Solution for Cavity Contraction in Dilatant Soils
1995, Yu, H.S. and Houlsby, G.T., International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 19, pp 793-811, 4.22 MB pdf
GL0741-Use of Dilatometer and Cone Penetration Tests to Estimate Settlements of Shallow Footings on Calcareous Sand
1996, Kaggwa, W. S., Jha, R. K. and Jaksa, M. B., Proceedings 7th Australia New Zealand Conf. on Geomechanics, Adelaide, pp. 909-914, 123 KB pdf
GL0742-Development of Automated Dilatometer and Cone Penetration Tests at the University of Adelaide, Australia
1995, Kaggwa, W. S., Jaksa, M. B. and Jha, R. K., Proceedings of Int. Conference on Advances in Site Investigation Practice, Thomas Telford, London, (Publ. 1996), pp. 372-382, 106 KB pdf
GL0811-Analysis of the Unloading of a Pressuremeter in Sand
1986, Houlsby, G.T., Clarke, B.G. and Wroth, C.P., Proceedings of the 2nd International Symposium on the Pressuremeter and Its Marine Applications, Texas, May, ASTM Special Technical Publication 950, ISBN 0-8031-0454-5, pp 245-264, 3113KB pdf
GL0823-Calibration Tests of the Cone-Pressuremeter in Sand
1990, Schnaid, F. and Houlsby, G.T., Proceedings of the 3rd International Symposium on Pressuremeters, ISP3, Oxford, April 2-6, ISBN 0-7277-1556-9, pp 263-272, 2289KB pdf
GL0829-Calibration Tests on the Cone Pressuremeter in Carbonate Sand
1991, Nutt, N.R.F. and Houlsby, G.T., Proceedings of the First International Conference on Calibration Testing, Potsdam, New York, June 28-29, ISBN 0-444-01652-X, pp 265-276, 2046KB pdf
GL0833-Development of the Cone Pressuremeter
1992, Houlsby, G.T. and Nutt, N.R.F., Proceedings of the Wroth Memorial Symposium, Predictive Soil Mechanics, Oxford, July 27-29, ISBN 0-7277-1916-5, pp 359-377, 4145KB pdf
GL0839-Time Dependent Behaviour of Sand from Pressuremeter Tests
1995, Nutt, N.R.F. and Houlsby, G.T., Proceedings of the Fourth International Symposium on Pressuremeters - ISP4, Sherbrooke, Canada, 17-19 May, ISBN 90-5410-545-3, pp 95-100, 2067KB pdf
GL0863-Quasi-static Undrained Expansion of a Cylindrical Cavity in Clay in the Presence of Shaft Friction and Anisotropic Initial Stresses
2003, Sagaseta, C, Houlsby, G.T. and Burd, H.J., Proc. Conference on Computational Fluid and Solid Mechanics, MIT, pp 619-622, 69KB pdf
GL0140-Geophysical Exploration for Engineering and Environmental Investigations
1995, U.S.Army engineer manual, 317 Pages
GL0250-Geophysics in soil mechanics - in situ shear moduli determined by SASW-technique and more traditional geotechnical methods
2001, Mats Svensson and Bjorn Moller, SWEDISH GEOTECHNICAL INSTITUTE, 44 Pages, 1.03 MB pdf
GL0278-Introductory Geophysical Inverse Theory
2001, John A. Scales, Martin L. Smith and Sven Treitel, Full text book, 208 Pages, 1.68 MB pdf
GL0279-INVERSE PROBLEMS IN GEOPHYSICS
2001, Roel Snieder and Jeannot Trampert, Full text book, 119 Pages, 2.09 MB zipped PostScript
GL0897-Seismic and Resistivity Methods of Geophysical Exploration
1971, United States Department of Agriculture, National Engineering Handbook, Technical Release Notice 44
GL1739-Application of Radon Transforms to the Processing of Airborne Geophysical Data
1992, Zhou, Y., PhD thesis, Delft university, Department of Civil Engineering and Geosciences
GL0272-A Laboratory Study of the Marchetti Dilatometer - Abstract
1993, Smith, M.G., PhD thesis, Oxford University, 7.97 MB pdf
GL0726-Horizontal Spatial Variability of Elastic Modulus in Sand from the Dilatometer
2004, Jaksa, M. B., Yeong, K. S., Wong, K. T. and Lee, S. L., Proc. 9th Australia New Zealand Conference on Geomechanics, Auckland, Vol. 1, pp. 289-294, 231 KB pdf
GL0741-Use of Dilatometer and Cone Penetration Tests to Estimate Settlements of Shallow Footings on Calcareous Sand
1996, Kaggwa, W. S., Jha, R. K. and Jaksa, M. B., Proceedings 7th Australia New Zealand Conf. on Geomechanics, Adelaide, pp. 909-914, 123 KB pdf
GL0742-Development of Automated Dilatometer and Cone Penetration Tests at the University of Adelaide, Australia
1995, Kaggwa, W. S., Jaksa, M. B. and Jha, R. K., Proceedings of Int. Conference on Advances in Site Investigation Practice, Thomas Telford, London, (Publ. 1996), pp. 372-382, 106 KB pdf
GL0838-Interpretation of the Marchetti Dilatometer in Clay
1995, Smith, M.G. and Houlsby, G.T., Proceedings of the 11th European Conference on Soil Mechanics and Foundation Engineering, Copenhagen, 28 May - 1 June, Vol. 1, ISBN 87-89833-00-7, pp 247-252, 2054KB pdf
GL1498-The Research Dilatometer: In-situ and Calibration Test Results
1993, Fretti, C., Lo Presti, D., and Salgado, R., Rivista Italiana di Geotecnica, XXVI(4), October, 237-243.
GL0781-Slurries in Geotechnical Engineering
2004, Raymond Krizek, The Twelfth Spencer J. Buchanan Lecture, 75 Pages, 3.33 MB pdf
GL0819-The Influence of Soil Stiffness and Lateral Stress on the Results of In-Situ Soil Tests
1989, Houlsby, G.T. and Wroth, C.P., Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Vol. 1, ISBN 90-6191-891-X, pp 227-232, 3078KB pdf
GL0851-In Situ Tests and the Pre-failure Deformation Behaviour of Soils
1999, Houlsby, G.T., Invited Report, Proceedings of the 2nd International Symposium, on Pre-Failure Deformation Characteristics of Geomaterials, Torino, 26-29 September, Balkema, ISBN 90 5809 077 9, Vol. 2, pp 1319-1324, 46KB pdf
GL0883-Lightweight Piston Sampler for Soft Soils
1969, United States Department of Agriculture, 12 Pages, 1.72MB pdf
GL1241-Deep penetration into frictional ductile and brittle materials
1992, Jeng, Fu Shu, PhD thesis, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering
GL1299-Determination of in situ stress in soil by hydraulic fracturing.
1974, Park, Young Sun, MS thesis, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering
GL1329-The mechanics of plate penetration in clays
1991, Rafalovich, Alexander, MS thesis, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering
GL1501-Interpretation of Large-Strain Crosshole Tests
1997, Salgado, R., Drnevich, V.P., Ashmawy, A., Grant, P., and Vallenas, P., Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), April, 382-388.
GL1511-Analysis of Calibration Chamber Plate Load Testing
2000, Lee, J. and Salgado, R., Canadian Geotechnical Journal, Feb., 37(1), 14-25.
GL1780-Three-dimensional multi-component imaging of ground penetrating radar data
2001, Van der Kruk, J., PhD thesis, Delft university, Department of Civil Engineering and Geosciences
GL1801-Characterization of borehole fractures by the body and interface waves
2005, Henry, F., PhD thesis, Delft university, Department of Civil Engineering and Geosciences
GL1829-Ground Monitoring using Resistivity Measurements in Glaciated Terrains
2001, Aaltonen, Jaana, PhD thesis, Royal Institute of Technology in Stockholm, KTH, Department of Civil and Environmental Engineering
GL1853-Disturbance Effects of Field Vane Tests in a Varved Clay
2004, Cerato, A.B. and Lutenegger, A.J., Proceedings of the 2nd International Site Characterization Conference, Porto, Portugal. September 19-22, Porto, Portugal. Vol. 1, pp. 861-868
GL1864-Multistation Methods for Geotechnical Characterization using Surface Waves
2000, Sebastiano Foti, PhD thesis, Technical University of Turin, Dept. of Structural and Geotechnical Eng., 250 Pages
GL1929-Geotechnical Observations At the Van Norman Complex after the 1994 Northridge Earthquake
1994, Davis, C. A., and J. P. Bardet, Proceedings of the Fifth Japan-US Workshop on Earthquake Resistant Design of Lifeline Facilities and Countermeasures for Soil Liquefaction, Technical Report No. NCEER-94-0026, Snowbird, Utah, pp. 63 - 77.
| Already one of 1303 GeotechLinks members? Sign up here to receive updates and news. Sign Up Supported by: 
|
